Pleated Filter Element
Pleated Filter Element
- Category:Filter Screen
- Material:stainless wire mesh
- Properties:Pleated Filter Element
- Application:For melt, air and hydraulic filtration.
or
We highly appreciate your feedback. TEL: 0086-10-68220585
E-mail: sales@kingdametal.com
E-mail: sales@kingdametal.com
- Mesh Description
- Contact Form
- Recommend Products
Pleated Filter Element
Pleated Filter Elements can be made with imported sintered fiber web or stainless steel wire cloth as filter media. Both backed and strengthened further with stainless steel perforated plates and coarse wire mesh layer. For melt, air and hydraulic filtration.
General Feature of Wire Mesh (Cloth) Pleased Filter Element:
The Pleated Filter Element is made of fine woven wire mesh as filtration media, this kind of filter element is usually used where the fluid enters and/or leaves a container or component. Aperture of the wire meshes varies with the particular filter element while the wire mesh filter element removes normally only the larger particles of contamination from the fluid.
How to Use:
Wire mesh filter element can be reused. It should be removed, cleaned and reinstalled at scheduled intervals or when it becomes dirty. Replace it with new elements when the currently one cannot be properly cleaned or is damaged.
Processes involved of Pleased Filter Element:
Stamping and perforating of the support sheet, shearing of wire mesh and stainless steel sheets, machining of caps and other accessories for the filter elements, welding of the multi-layer sheets, slitting of the filter media, assembling of the parts, pleating of the sheets, acid washing of the filter elements and other processes necessary.
If you are interested, please feel free to contact the following, Tel: +86-10-68283337, Email: sales@kingdametal.com
