how to assemble wire shelf racks
how to assemble wire shelf racks
Before you get started, make sure you have all of your parts. Standard units come with 4 posts, 4 leveling feet, wire shelves, and 4 plastic clips per shelf. Got all of that? Perfect, let's get to it! Getting more information, welcome WUZHOUKINGDA.
To assemble:
1. Screw the leveling feet into the bottom of your posts (If you're going to install wheels, switch them out at the end).
2. Snap clips onto the posts where you want your bottom wire shelf to be. Count the notches in the post to make sure the clips are level.
3. Turn your bottom wire shelf on its side. Insert the posts through the corners of the shelf from the bottom. The clips will be wedged into place, creating a solid base.
4. Flip the wire shelf upright and give it a quick tap in the corners to make sure it's snug.
5. Add clips where you want your next shelf, then lower it into place. (If you have a large shelf or tall posts, it's easier to construct with a friend).
6. Repeat step 5 until all of your wire shelves are where you want them.
7. If you want to add casters, lay your shelving kit on it's side and unscrew the leveling feet. Insert your wheels, then stand the unit back up.
