Make a Wire bread Basket
Datetime:2015-08-31 Hits:
A bread basket can store the bread and any other dessert you like, even can be a decoration of your home or restaurant. You can make them by hand acutally or purchase them directly online. There some steps of wire bread basket making for your reference as below. If you want more special, welcome WUZHOUKINGDA, a lot of range can be chosen.
Using the rest of the wire and the rest of the tubes, continue threading the tubes onto the wire and bend the pieces into a 3-D box form. Pull your wire and pipes tight after each step to ensure adequate tension. You'll want to thread the pipes onto the wire one by one as you create the box. Thread your wire through the nearest pipe to secure each pipe as you build out the 3-D shape.
If you need to connect areas that are across from one another, just slip the wire through the pipes until the wire comes out at the correct junction. There is not necessarily a pattern to do so — simply follow the lines needed to create the 3-D box, and string the wire through the pipes to create the form.
Turn the box on its side so that the edge you intend to work on is facing up. With your work gloves still on, flatten the pieces of cut chicken wire between your flattened palms. Lay the first piece of cut wire on the box. Gently fold the wire edges up and over the aluminum tubes on all four sides to attach it to the box frame. Repeat the steps on all four sides of the box.
Flatten the cut chicken wire with your work gloves on again, and then use the same wire bend-and-overlap method to attach the piece to the underside of the box, then the wire bread basket will be completed.
