Homemade Rat Traps That Work
Datetime:2014-04-30 Hits:
Constructing a homemade rattrap is a straightforward as well as economical solution when it comes to resolving a rat infestation. Homeowners do not have to result to buying expensive traps or utilize toxic poison that could put at risk family members and pets. Several trapping methods for rats are effortless to build and can be supplied with everyday materials that tend to be lying around a home. Additionally, traps allow homeowners or an individual to capture then kill, or capture and transport the critter to a suitable location.
Box Trap
Start forming a box shape with four pieces of plywood, then attach a 1-foot long wood beam to one 3-foot long beam. Fasten the pieces with wood glue and nails. Attach another 1-foot long piece of plywood directly to another 3-foot long beam. The wood should form a rectangle box with an open top and bottom. Place mesh netting over the open top and bottom or enclose with plywood. Seal off one end of the box traps with mesh netting or plywood, leaving just one end open. Measure the opening end of the box. Cut a piece of plywood that covers and fits over the opening. Fashion the cut plywood piece to the top of the inside of the box. Design the "trap door" covering, so that if falls and blocks the pathway out of the trap.
Once you've created the box, add peanut butter and fish guts as bait. Peanut butter has a strong odor, just about any wild animal. Place the box, within the area where it is most likely to catch, rats. Use a piece of PVC pipe to prop-up, the "trap door." The PVC pipe should be position at either corner of the opening allowing enough space for a rat to enter the box. Attach the peanut butter/ fish guts to the one end of utility wire and connect to the PVC pipe holding up the trap door of the box. The wire attached to the bait acts, as the trigger. Once the rat gnaws and pulls the wire, the trap doors will releases and block the pathway to escape, enclosing the rat within the box.
Leave and come back the next day. Check your trap daily; make sure that the trap has caught a rat and not another wild animal such as a squirrel or chipmunk. If the trap holds a rat, relocate the occupant to another area soon as possible.
Trash Can Trap
The trash can must stand at least 4 feet tall and come with a lid. Remove the lid and place the garbage can in an easily accessible location. Stand a cinder block in an upright position next to the can. Place another cinder block inside the trashcan in a horizontal position. The weight of the cinder block will prevent a rat or rats from tipping over the can and escaping. Use a long piece of cloth 3- feet by 3-feet wide where it becomes the opening of the can. Wrap a small cord around the edges of the cloth. You want the cloth loose so it can give way when an object is placed on top of the center cloth. Place bacon, dead fish, raw chicken, watermelon ends or sugary marshmallows as bait, directly onto the center of the cloth. Position a small piece of bait on to the vertical inside cinder block, outside the can. In due course, the rat will climb onto the outside cinder block and onto the trashcan. Theoretically, a rat is supposed to come by and see the bait on the cinder block and eat the bait, and see or smell the bait on top of the can. Hungry, the rat will climb up onto the cloth-covered can and attempt to walk across the cloth to reach the tasty bait. However, to the rat's surprise the cloth will give way, dropping the rat into the trashcan. You can place the trashcan's lid over the top and relocate the rat to a farm field or forestry preserve.
