Custom Wire Washing Basket
Datetime:2016-08-22 Hits:
When it comes to washing lots of small, delicate parts, using a lidded wire mesh basket that has been partitioned into many smaller sections using dividers is a great way to ensure that you can wash a large quantity of parts at once without the risk of them colliding with one another and becoming damaged.
Recently, our engineers were tasked to create a mesh basket with dividers for washing up to 24 parts at a time. For this particular application, there were several different sets of parts that the client would be using the mesh basket to wash. The smallest parts to be washed measured 2 3/4” diameter and were half an inch tall, while the largest parts were 4 5/8” in diameter and 1 1/4” tall.
Because of the differences in the size and shape of the parts, using custom-shaped wire forms for any one specific part was out of the question. So, we went with a more open, universally-applicable design that kept parts separate through the use of dividers. A hinged lid would close over the mesh basket’s divided compartments to ensure that no parts could fall out of the basket during the wash cycle, even if the basket was rotated.
With this design, the customer was able to use one type of basket for several different sets of parts being put through this wash process, and the baskets may still be useful for future product lines.
There are many wire mesh baskets with high quality in our company WUZHOUKINGDA. The size also can be made according to your requirements. Welcome consult!
